dmesg - Intel Core i5-4440
microcode: microcode updated early to revision 0x27, date = 2019-02-26
Linux version 5.0.0-37-generic (buildd@lcy01-amd64-023) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #40~18.04.1-Ubuntu SMP Thu Nov 14 12:06:39 UTC 2019 (Ubuntu 5.0.0-37.40~18.04.1-generic 5.0.21)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000a99fefff] usable
BIOS-e820: [mem 0x00000000a99ff000-0x00000000a9a05fff] ACPI NVS
BIOS-e820: [mem 0x00000000a9a06000-0x00000000aa23efff] usable
BIOS-e820: [mem 0x00000000aa23f000-0x00000000aa4a9fff] reserved
BIOS-e820: [mem 0x00000000aa4aa000-0x00000000ba3d4fff] usable
BIOS-e820: [mem 0x00000000ba3d5000-0x00000000ba5e8fff] reserved
BIOS-e820: [mem 0x00000000ba5e9000-0x00000000ba5fcfff] ACPI data
BIOS-e820: [mem 0x00000000ba5fd000-0x00000000ba6d0fff] ACPI NVS
BIOS-e820: [mem 0x00000000ba6d1000-0x00000000baf63fff] reserved
BIOS-e820: [mem 0x00000000baf64000-0x00000000baffefff] type 20
BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
BIOS-e820: [mem 0x00000000bb800000-0x00000000bf9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043e5fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xba5ed000 ACPI 2.0=0xba5ed000 SMBIOS=0xf04c0 MPS=0xfd410
secureboot: Secure boot could not be determined (mode 0)
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. B85-HD3/B85-HD3, BIOS F3 05/09/2013
tsc: Fast TSC calibration using PIT
tsc: Detected 3092.762 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x43e600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FC0000000 write-back
2 base 00C0000000 mask 7FC0000000 uncachable
3 base 00BC000000 mask 7FFC000000 uncachable
4 base 00BB800000 mask 7FFF800000 uncachable
5 base 043F000000 mask 7FFF000000 uncachable
6 base 043E800000 mask 7FFF800000 uncachable
7 base 043E600000 mask 7FFFE00000 uncachable
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 16286M
gran_size: 64K chunk_size: 64K num_reg: 10 lose cover RAM: 486M
gran_size: 64K chunk_size: 128K num_reg: 10 lose cover RAM: 486M
gran_size: 64K chunk_size: 256K num_reg: 10 lose cover RAM: 486M
gran_size: 64K chunk_size: 512K num_reg: 10 lose cover RAM: 486M
gran_size: 64K chunk_size: 1M num_reg: 10 lose cover RAM: 486M
gran_size: 64K chunk_size: 2M num_reg: 10 lose cover RAM: 486M
gran_size: 64K chunk_size: 4M num_reg: 10 lose cover RAM: 486M
gran_size: 64K chunk_size: 8M num_reg: 10 lose cover RAM: 486M
gran_size: 64K chunk_size: 16M num_reg: 10 lose cover RAM: 230M
*BAD*gran_size: 64K chunk_size: 32M num_reg: 10 lose cover RAM: -24M
*BAD*gran_size: 64K chunk_size: 64M num_reg: 10 lose cover RAM: -24M
gran_size: 64K chunk_size: 128M num_reg: 10 lose cover RAM: 0G
gran_size: 64K chunk_size: 256M num_reg: 10 lose cover RAM: 0G
gran_size: 64K chunk_size: 512M num_reg: 10 lose cover RAM: 0G
gran_size: 64K chunk_size: 1G num_reg: 10 lose cover RAM: 0G
*BAD*gran_size: 64K chunk_size: 2G num_reg: 10 lose cover RAM: -1G
gran_size: 128K chunk_size: 128K num_reg: 10 lose cover RAM: 486M
gran_size: 128K chunk_size: 256K num_reg: 10 lose cover RAM: 486M
gran_size: 128K chunk_size: 512K num_reg: 10 lose cover RAM: 486M
gran_size: 128K chunk_size: 1M num_reg: 10 lose cover RAM: 486M
gran_size: 128K chunk_size: 2M num_reg: 10 lose cover RAM: 486M
gran_size: 128K chunk_size: 4M num_reg: 10 lose cover RAM: 486M
gran_size: 128K chunk_size: 8M num_reg: 10 lose cover RAM: 486M
gran_size: 128K chunk_size: 16M num_reg: 10 lose cover RAM: 230M
*BAD*gran_size: 128K chunk_size: 32M num_reg: 10 lose cover RAM: -24M
*BAD*gran_size: 128K chunk_size: 64M num_reg: 10 lose cover RAM: -24M
gran_size: 128K chunk_size: 128M num_reg: 10 lose cover RAM: 0G
gran_size: 128K chunk_size: 256M num_reg: 10 lose cover RAM: 0G
gran_size: 128K chunk_size: 512M num_reg: 10 lose cover RAM: 0G
gran_size: 128K chunk_size: 1G num_reg: 10 lose cover RAM: 0G
*BAD*gran_size: 128K chunk_size: 2G num_reg: 10 lose cover RAM: -1G
gran_size: 256K chunk_size: 256K num_reg: 10 lose cover RAM: 486M
gran_size: 256K chunk_size: 512K num_reg: 10 lose cover RAM: 486M
gran_size: 256K chunk_size: 1M num_reg: 10 lose cover RAM: 486M
gran_size: 256K chunk_size: 2M num_reg: 10 lose cover RAM: 486M
gran_size: 256K chunk_size: 4M num_reg: 10 lose cover RAM: 486M
gran_size: 256K chunk_size: 8M num_reg: 10 lose cover RAM: 486M
gran_size: 256K chunk_size: 16M num_reg: 10 lose cover RAM: 230M
*BAD*gran_size: 256K chunk_size: 32M num_reg: 10 lose cover RAM: -24M
*BAD*gran_size: 256K chunk_size: 64M num_reg: 10 lose cover RAM: -24M
gran_size: 256K chunk_size: 128M num_reg: 10 lose cover RAM: 0G
gran_size: 256K chunk_size: 256M num_reg: 10 lose cover RAM: 0G
gran_size: 256K chunk_size: 512M num_reg: 10 lose cover RAM: 0G
gran_size: 256K chunk_size: 1G num_reg: 10 lose cover RAM: 0G
*BAD*gran_size: 256K chunk_size: 2G num_reg: 10 lose cover RAM: -1G
gran_size: 512K chunk_size: 512K num_reg: 10 lose cover RAM: 486M
gran_size: 512K chunk_size: 1M num_reg: 10 lose cover RAM: 486M
gran_size: 512K chunk_size: 2M num_reg: 10 lose cover RAM: 486M
gran_size: 512K chunk_size: 4M num_reg: 10 lose cover RAM: 486M
gran_size: 512K chunk_size: 8M num_reg: 10 lose cover RAM: 486M
gran_size: 512K chunk_size: 16M num_reg: 10 lose cover RAM: 230M
*BAD*gran_size: 512K chunk_size: 32M num_reg: 10 lose cover RAM: -24M
*BAD*gran_size: 512K chunk_size: 64M num_reg: 10 lose cover RAM: -24M
gran_size: 512K chunk_size: 128M num_reg: 10 lose cover RAM: 0G
gran_size: 512K chunk_size: 256M num_reg: 10 lose cover RAM: 0G
gran_size: 512K chunk_size: 512M num_reg: 10 lose cover RAM: 0G
gran_size: 512K chunk_size: 1G num_reg: 10 lose cover RAM: 0G
*BAD*gran_size: 512K chunk_size: 2G num_reg: 10 lose cover RAM: -1G
gran_size: 1M chunk_size: 1M num_reg: 10 lose cover RAM: 486M
gran_size: 1M chunk_size: 2M num_reg: 10 lose cover RAM: 486M
gran_size: 1M chunk_size: 4M num_reg: 10 lose cover RAM: 486M
gran_size: 1M chunk_size: 8M num_reg: 10 lose cover RAM: 486M
gran_size: 1M chunk_size: 16M num_reg: 10 lose cover RAM: 230M
*BAD*gran_size: 1M chunk_size: 32M num_reg: 10 lose cover RAM: -24M
*BAD*gran_size: 1M chunk_size: 64M num_reg: 10 lose cover RAM: -24M
gran_size: 1M chunk_size: 128M num_reg: 10 lose cover RAM: 0G
gran_size: 1M chunk_size: 256M num_reg: 10 lose cover RAM: 0G
gran_size: 1M chunk_size: 512M num_reg: 10 lose cover RAM: 0G
gran_size: 1M chunk_size: 1G num_reg: 10 lose cover RAM: 0G
*BAD*gran_size: 1M chunk_size: 2G num_reg: 10 lose cover RAM: -1G
gran_size: 2M chunk_size: 2M num_reg: 10 lose cover RAM: 486M
gran_size: 2M chunk_size: 4M num_reg: 10 lose cover RAM: 486M
gran_size: 2M chunk_size: 8M num_reg: 10 lose cover RAM: 486M
gran_size: 2M chunk_size: 16M num_reg: 10 lose cover RAM: 230M
*BAD*gran_size: 2M chunk_size: 32M num_reg: 10 lose cover RAM: -24M
*BAD*gran_size: 2M chunk_size: 64M num_reg: 10 lose cover RAM: -24M
gran_size: 2M chunk_size: 128M num_reg: 10 lose cover RAM: 0G
gran_size: 2M chunk_size: 256M num_reg: 10 lose cover RAM: 0G
gran_size: 2M chunk_size: 512M num_reg: 10 lose cover RAM: 0G
gran_size: 2M chunk_size: 1G num_reg: 10 lose cover RAM: 0G
*BAD*gran_size: 2M chunk_size: 2G num_reg: 10 lose cover RAM: -1G
gran_size: 4M chunk_size: 4M num_reg: 10 lose cover RAM: 486M
gran_size: 4M chunk_size: 8M num_reg: 10 lose cover RAM: 486M
gran_size: 4M chunk_size: 16M num_reg: 10 lose cover RAM: 230M
*BAD*gran_size: 4M chunk_size: 32M num_reg: 10 lose cover RAM: -22M
*BAD*gran_size: 4M chunk_size: 64M num_reg: 10 lose cover RAM: -22M
gran_size: 4M chunk_size: 128M num_reg: 10 lose cover RAM: 2M
gran_size: 4M chunk_size: 256M num_reg: 10 lose cover RAM: 2M
gran_size: 4M chunk_size: 512M num_reg: 10 lose cover RAM: 2M
gran_size: 4M chunk_size: 1G num_reg: 10 lose cover RAM: 2M
*BAD*gran_size: 4M chunk_size: 2G num_reg: 10 lose cover RAM: -1022M
gran_size: 8M chunk_size: 8M num_reg: 10 lose cover RAM: 486M
gran_size: 8M chunk_size: 16M num_reg: 10 lose cover RAM: 230M
gran_size: 8M chunk_size: 32M num_reg: 10 lose cover RAM: 230M
gran_size: 8M chunk_size: 64M num_reg: 10 lose cover RAM: 6M
gran_size: 8M chunk_size: 128M num_reg: 8 lose cover RAM: 6M
gran_size: 8M chunk_size: 256M num_reg: 8 lose cover RAM: 6M
gran_size: 8M chunk_size: 512M num_reg: 8 lose cover RAM: 6M
gran_size: 8M chunk_size: 1G num_reg: 8 lose cover RAM: 6M
gran_size: 8M chunk_size: 2G num_reg: 9 lose cover RAM: 6M
gran_size: 16M chunk_size: 16M num_reg: 10 lose cover RAM: 238M
gran_size: 16M chunk_size: 32M num_reg: 10 lose cover RAM: 238M
gran_size: 16M chunk_size: 64M num_reg: 10 lose cover RAM: 14M
gran_size: 16M chunk_size: 128M num_reg: 8 lose cover RAM: 14M
gran_size: 16M chunk_size: 256M num_reg: 8 lose cover RAM: 14M
gran_size: 16M chunk_size: 512M num_reg: 8 lose cover RAM: 14M
gran_size: 16M chunk_size: 1G num_reg: 8 lose cover RAM: 14M
gran_size: 16M chunk_size: 2G num_reg: 9 lose cover RAM: 14M
gran_size: 32M chunk_size: 32M num_reg: 10 lose cover RAM: 126M
gran_size: 32M chunk_size: 64M num_reg: 10 lose cover RAM: 30M
gran_size: 32M chunk_size: 128M num_reg: 8 lose cover RAM: 30M
gran_size: 32M chunk_size: 256M num_reg: 8 lose cover RAM: 30M
gran_size: 32M chunk_size: 512M num_reg: 8 lose cover RAM: 30M
gran_size: 32M chunk_size: 1G num_reg: 8 lose cover RAM: 30M
gran_size: 32M chunk_size: 2G num_reg: 9 lose cover RAM: 30M
gran_size: 64M chunk_size: 64M num_reg: 10 lose cover RAM: 94M
gran_size: 64M chunk_size: 128M num_reg: 8 lose cover RAM: 94M
gran_size: 64M chunk_size: 256M num_reg: 7 lose cover RAM: 94M
gran_size: 64M chunk_size: 512M num_reg: 7 lose cover RAM: 94M
gran_size: 64M chunk_size: 1G num_reg: 7 lose cover RAM: 94M
gran_size: 64M chunk_size: 2G num_reg: 8 lose cover RAM: 94M
gran_size: 128M chunk_size: 128M num_reg: 9 lose cover RAM: 158M
gran_size: 128M chunk_size: 256M num_reg: 7 lose cover RAM: 158M
gran_size: 128M chunk_size: 512M num_reg: 7 lose cover RAM: 158M
gran_size: 128M chunk_size: 1G num_reg: 7 lose cover RAM: 158M
gran_size: 128M chunk_size: 2G num_reg: 8 lose cover RAM: 158M
gran_size: 256M chunk_size: 256M num_reg: 7 lose cover RAM: 414M
gran_size: 256M chunk_size: 512M num_reg: 7 lose cover RAM: 414M
gran_size: 256M chunk_size: 1G num_reg: 7 lose cover RAM: 414M
gran_size: 256M chunk_size: 2G num_reg: 8 lose cover RAM: 414M
gran_size: 512M chunk_size: 512M num_reg: 5 lose cover RAM: 926M
gran_size: 512M chunk_size: 1G num_reg: 7 lose cover RAM: 926M
gran_size: 512M chunk_size: 2G num_reg: 8 lose cover RAM: 926M
gran_size: 1G chunk_size: 1G num_reg: 3 lose cover RAM: 1950M
gran_size: 1G chunk_size: 2G num_reg: 3 lose cover RAM: 1950M
gran_size: 2G chunk_size: 2G num_reg: 3 lose cover RAM: 1950M
mtrr_cleanup: can not find optimal value
please specify mtrr_gran_size/mtrr_chunk_size
e820: update [mem 0xbb800000-0xffffffff] usable ==> reserved
last_pfn = 0xbb000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd6a0-0x000fd6af]
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0x17a01000, 0x17a01fff] PGTABLE
BRK [0x17a02000, 0x17a02fff] PGTABLE
BRK [0x17a03000, 0x17a03fff] PGTABLE
BRK [0x17a04000, 0x17a04fff] PGTABLE
BRK [0x17a05000, 0x17a05fff] PGTABLE
BRK [0x17a06000, 0x17a06fff] PGTABLE
BRK [0x17a07000, 0x17a07fff] PGTABLE
BRK [0x17a08000, 0x17a08fff] PGTABLE
BRK [0x17a09000, 0x17a09fff] PGTABLE
BRK [0x17a0a000, 0x17a0afff] PGTABLE
RAMDISK: [mem 0x2fcd6000-0x33e62fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000BA5ED000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BA5ED078 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BA5F8190 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000BA5ED188 00B004 (v02 ALASKA A M I 000000F3 INTL 20091112)
ACPI: FACS 0x00000000BA6CF080 000040
ACPI: APIC 0x00000000BA5F82A0 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000BA5F8318 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000BA5F8858 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: MCFG 0x00000000BA5F9330 00003C (v01 01072009 MSFT 00000097)
ACPI: HPET 0x00000000BA5F9370 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000BA5F93A8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000BA5F9718 003299 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: BGRT 0x00000000BA5FC9B8 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: DMAR 0x00000000BA5FC9F0 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043e5fffff]
NODE_DATA(0) allocated [mem 0x43e5d3000-0x43e5fdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000043e5fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x00000000a99fefff]
node 0: [mem 0x00000000a9a06000-0x00000000aa23efff]
node 0: [mem 0x00000000aa4aa000-0x00000000ba3d4fff]
node 0: [mem 0x00000000bafff000-0x00000000baffffff]
node 0: [mem 0x0000000100000000-0x000000043e5fffff]
Zeroed struct page in unavailable ranges: 24318 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000043e5fffff]
On node 0 totalpages: 4163330
DMA zone: 64 pages used for memmap
DMA zone: 27 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 11846 pages used for memmap
DMA32 zone: 758116 pages, LIFO batch:63
Normal zone: 53144 pages used for memmap
Normal zone: 3401216 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0xbba00000-0xbf9fffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xa99ff000-0xa9a05fff]
PM: Registered nosave memory: [mem 0xaa23f000-0xaa4a9fff]
PM: Registered nosave memory: [mem 0xba3d5000-0xba5e8fff]
PM: Registered nosave memory: [mem 0xba5e9000-0xba5fcfff]
PM: Registered nosave memory: [mem 0xba5fd000-0xba6d0fff]
PM: Registered nosave memory: [mem 0xba6d1000-0xbaf63fff]
PM: Registered nosave memory: [mem 0xbaf64000-0xbaffefff]
PM: Registered nosave memory: [mem 0xbb000000-0xbb7fffff]
PM: Registered nosave memory: [mem 0xbb800000-0xbf9fffff]
PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xbfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
random: get_random_bytes called from start_kernel+0x97/0x516 with crng_init=0
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 46 pages/cpu s151552 r8192 d28672 u524288
pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 4098249
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16018500K/16653320K available (14339K kernel code, 2336K rwdata, 4416K rodata, 2588K init, 5192K bss, 634820K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 41688 entries in 163 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20181213
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
DMAR: RMRR base: 0x000000ba567000 end: 0x000000ba573fff
DMAR: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c94925c0cb, max_idle_ns: 440795335375 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.52 BogoMIPS (lpj=12371048)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 36K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-4440 CPU @ 3.10GHz (family: 0x6, model: 0x3c, stepping: 0x3)
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
rcu: Hierarchical SRCU implementation.
random: crng done (trusting CPU's manufacturer)
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (24742.09 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xa99ff000-0xa9a05fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xba5fd000-0xba6d0fff] (868352 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 14:28:07, date: 2021-03-31
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1617200887.040:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 5 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9879EB95FC00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9879EBF45000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9879EB9A1400 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 3F
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf0514000-0xf0517fff 64bit]
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf0500000-0xf050ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf051f000-0xf051f00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0xf0c0-0xf0c7]
pci 0000:00:16.3: reg 0x14: [mem 0xf051d000-0xf051dfff]
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf051c000-0xf051c3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf0510000-0xf0513fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf051b000-0xf051b3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8c50] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf051a000-0xf051a7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf0519000-0xf05190ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [8086:244e] type 01 class 0x060401
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 02-03] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff]
pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0xbfa00000-0xfeafffff window] (subtractive decode)
pci_bus 0000:03: extended config space not accessible
pci 0000:03:00.0: [10ec:8169] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:03:00.0: reg 0x14: [mem 0xf0420000-0xf04200ff]
pci 0000:03:00.0: reg 0x30: [mem 0xf0400000-0xf041ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03] (subtractive decode)
pci 0000:02:00.0: bridge window [io 0xe000-0xefff]
pci 0000:02:00.0: bridge window [mem 0xf0400000-0xf04fffff]
pci 0000:02:00.0: bridge window [io 0xe000-0xefff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0xf0400000-0xf04fffff] (subtractive decode)
pci 0000:02:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:02:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0xbfa00000-0xfeafffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0xa99ff000-0xabffffff]
e820: reserve RAM buffer [mem 0xaa23f000-0xabffffff]
e820: reserve RAM buffer [mem 0xba3d5000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
e820: reserve RAM buffer [mem 0x43e600000-0x43fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1c00-0x1cfe] has been reserved
system 00:01: [io 0x1d00-0x1dfe] has been reserved
system 00:01: [io 0x1e00-0x1efe] has been reserved
system 00:01: [io 0x1f00-0x1ffe] has been reserved
system 00:01: [io 0x1800-0x18fe] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0a00-0x0a0f] has been reserved
system 00:04: [io 0x0a30-0x0a3f] has been reserved
system 00:04: [io 0x0a20-0x0a2f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: [mem 0xf7fef000-0xf7feffff] has been reserved
system 00:08: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [io 0xe000-0xefff]
pci 0000:02:00.0: bridge window [mem 0xf0400000-0xf04fffff]
pci 0000:00:1c.3: PCI bridge to [bus 02-03]
pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0xbfa00000-0xfeafffff window]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xf0400000-0xf04fffff]
pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:02: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:02: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:02: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:02: resource 11 [mem 0xbfa00000-0xfeafffff window]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff]
pci_bus 0000:03: resource 4 [io 0xe000-0xefff]
pci_bus 0000:03: resource 5 [mem 0xf0400000-0xf04fffff]
pci_bus 0000:03: resource 6 [io 0x0000-0x0cf7 window]
pci_bus 0000:03: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:03: resource 9 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:03: resource 10 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:03: resource 11 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:03: resource 12 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:03: resource 13 [mem 0xbfa00000-0xfeafffff window]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6a0 took 21855 usecs
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6a0 took 23423 usecs
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 67124K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xa59ff000-0xa99ff000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.28)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4.1 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial 0000:00:16.3: enabling device (0000 -> 0003)
0000:00:16.3: ttyS4 at I/O 0xf0c0 (irq = 19, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf051c000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.0.0-37-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf051b000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.0.0-37-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.0.0-37-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.0.0-37-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
mce: Using 9 MCE banks
RAS: Correctable Errors collector initialized.
microcode: sig=0x306c3, pf=0x2, revision=0x27
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1228679838, 200442)->(1235289349, -6409069)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 88fcad88465f792265cf358553c118dce4c5c672'
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI db list
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI MokListRT
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI dbx list
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
Magic number: 13:721:486
rtc_cmos 00:02: setting system clock to 2021-03-31T14:28:08 UTC (1617200888)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2588K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2016K
Freeing unused kernel image memory: 1728K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ems sxs apst
VFIO - User Level meta-driver version: 0.3
libphy: r8169: probed
r8169 0000:03:00.0 eth0: RTL8169sb/8110sb, c0:4a:00:03:18:65, XID 100, IRQ 19
r8169 0000:03:00.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
r8169 0000:03:00.0 enp3s0: renamed from eth0
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
scsi host0: ahci
[drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf051a000 port 0xf051a100 irq 27
ata2: SATA max UDMA/133 abar m2048@0xf051a000 port 0xf051a180 irq 27
ata3: SATA max UDMA/133 abar m2048@0xf051a000 port 0xf051a200 irq 27
ata4: SATA max UDMA/133 abar m2048@0xf051a000 port 0xf051a280 irq 27
ata5: SATA max UDMA/133 abar m2048@0xf051a000 port 0xf051a300 irq 27
ata6: SATA max UDMA/133 abar m2048@0xf051a000 port 0xf051a380 irq 27
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 3-4: new full-speed USB device number 2 using xhci_hcd
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 3-4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-4: Product: USB Receiver
usb 3-4: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ata1.00: ATA-10: TOSHIBA HDWD260, KQ000A, max UDMA/100
ata1.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 32), AA
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input2
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA HDWD260 0A PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 3-9: new high-speed USB device number 3 using xhci_hcd
input: Logitech Unifying Device. Wireless PID:404d Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input3
input: Logitech Unifying Device. Wireless PID:404d Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input4
input: Logitech Unifying Device. Wireless PID:404d Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input5
input: Logitech Unifying Device. Wireless PID:404d System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input6
hid-generic 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:404d] on usb-0000:00:14.0-4:1
usb 3-9: New USB device found, idVendor=125f, idProduct=c96a, bcdDevice=11.00
usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-9: Product: ADATA USB Flash Drive
usb 3-9: Manufacturer: ADATA
usb 3-9: SerialNumber: 207292149001001F
usb-storage 3-9:1.0: USB Mass Storage device detected
scsi host6: usb-storage 3-9:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: HPA detected: current 234439535, native 234441648
ata2.00: ATA-8: KINGSTON SHFS37A120G, 60AABBF0, max UDMA/133
ata2.00: 234439535 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA KINGSTON SHFS37A BBF0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 234439535 512-byte logical blocks: (120 GB/112 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI removable disk
tsc: Refined TSC clocksource calibration: 3092.837 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c94d933972, max_idle_ns: 440795249834 ns
clocksource: Switched to clocksource tsc
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ATA-10: TOSHIBA HDWD260, KQ000A, max UDMA/100
ata3.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA TOSHIBA HDWD260 0A PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Attached SCSI removable disk
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
sd 2:0:0:0: [sdc] Attached SCSI removable disk
scsi 6:0:0:0: Direct-Access ADATA USB Flash Drive 1100 PQ: 0 ANSI: 4
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdd] 30310400 512-byte logical blocks: (15.5 GB/14.5 GiB)
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 6:0:0:0: [sdd] Attached SCSI removable disk
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: ATA-10: TOSHIBA HDWD260, KQ000A, max UDMA/100
ata6.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: configured for UDMA/100
scsi 5:0:0:0: Direct-Access ATA TOSHIBA HDWD260 0A PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg4 type 0
sd 5:0:0:0: [sde] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
sd 5:0:0:0: [sde] 4096-byte physical blocks
sd 5:0:0:0: [sde] Write Protect is off
sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
input: Logitech K400 Plus as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input10
logitech-hidpp-device 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:00:14.0-4:1
sd 5:0:0:0: [sde] Attached SCSI removable disk
SGI XFS with ACLs, security attributes, realtime, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on LVM2 metadata daemon socket.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd-journald[1069]: Received request to flush runtime journal from PID 1
lp0: using parport0 (interrupt-driven).
ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20181213/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20181213/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20181213/utaddress-213)
ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20181213/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20181213/utaddress-213)
ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20181213/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:03.0: Linked as a consumer to 0000:00:02.0
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D2: dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC1D2: inputs:
snd_hda_codec_realtek hdaudioC1D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D2: Line=0x1a
snd_hda_codec_realtek hdaudioC1D2: dig-in=0x1f
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
cryptd: max_cpu_qlen set to 1000
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input22
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input23
snd_hda_intel 0000:00:1b.0: device 1458:a002 is on the power_save blacklist, forcing power_save to 0
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
zram: Added device: zram0
zram: Added device: zram1
zram: Added device: zram2
zram: Added device: zram3
zram0: detected capacity change from 0 to 2086309888
Adding 2037408k swap on /dev/zram0. Priority:5 extents:1 across:2037408k SSFS
zram1: detected capacity change from 0 to 2086309888
Adding 2037408k swap on /dev/zram1. Priority:5 extents:1 across:2037408k SSFS
zram2: detected capacity change from 0 to 2086309888
Adding 2037408k swap on /dev/zram2. Priority:5 extents:1 across:2037408k SSFS
zram3: detected capacity change from 0 to 2086309888
Adding 2037408k swap on /dev/zram3. Priority:5 extents:1 across:2037408k SSFS
RTL8211C Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211C Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
r8169 0000:03:00.0 enp3s0: Link is Down
broken atomic modeset userspace detected, disabling atomic
audit: type=1400 audit(1617200966.123:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1803 comm="apparmor_parser"
audit: type=1400 audit(1617200966.123:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1803 comm="apparmor_parser"
r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
r8169 0000:03:00.0 enp3s0: Link is Down
r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx
r8169 0000:03:00.0 enp3s0: Link is Down
r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
perf: interrupt took too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[drm] GPU HANG: ecode 7:0:0x8fd0ffff, in betsy [19995], reason: hang on rcs0, action: reset
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
i915 0000:00:02.0: Resetting chip for hang on rcs0
perf: interrupt took too long (3147 > 3137), lowering kernel.perf_event_max_sample_rate to 63500
perf: interrupt took too long (3950 > 3933), lowering kernel.perf_event_max_sample_rate to 50500
perf: interrupt took too long (4976 > 4937), lowering kernel.perf_event_max_sample_rate to 40000
perf: interrupt took too long (6247 > 6220), lowering kernel.perf_event_max_sample_rate to 32000
r8169 0000:03:00.0 enp3s0: Link is Down
r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
r8169 0000:03:00.0 enp3s0: Link is Down
r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
r8169 0000:03:00.0 enp3s0: Link is Down
r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx